components product information connector new 1/3 mb-0156-3 october 2010 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. features SMT type smb connector compact coaxial connec tors compatible with iec60169-10 (type smb) standard the smb series are compact co axial smb (iec60169-10) type connectors with terminal area compatible with board surface mounting. these connectors are ideally su ited for applications requiring miniaturization and high density such as wirele ss high-frequency devices, wireless communication device s, and measuring devices. applications ?compact coaxial connectors compatible wit h the iec60169-10 (type smb) standard. ?compatible with reflow and automatic mounting with vacuum area tape. ?low profile, connector height 6.5mm from board. ?available with and without outer co nductor SMT area bosses which prevent connector misalignme nt during reflow. (with boss type: smbr003d00; wi thout boss type: smbr004d00) ?equivalent high frequency performanc e as conventional through-hole type connectors. ?design concept is based on high-accuracy simulation technology to optimize impedance matching, low reflection and low loss. mobile phones, phs base stations, wireless lan access points, wireless communication equipment, hi gh frequency modules, wireless power amplifiers, measuring equipment, transmi ssion characteristic measuring devices, rfid (ic tag, automatic identification), broadcasting equipment, etc. SMT type smb connector p/n no.: smbr003d00 smbr004d00 rohs compliant
mb-0156-3 2/3 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. materials and finishes general specifications ?characteristic impedance: 50 ohm ?operating frequency: dc to 3ghz ?v.s.w.r.: 1.2 max. ?rated current: dc 2a ?rated voltage: ac100v.r.m.s ?operating temperature: -40 to+85 deg. c ?contact resistance: initial, 8m ? max. (change after test, 12m ? max.) ?dielectric withstanding voltage: ac 500 vr.m.s (1 min.) ?insulation resistance: 500m ? min. (dc500v) component material / finish insulator sps resin signal contact (central conductor) phosphor bronze / au plating over ni outer conductor (ground contact) brass / au plating over ni connector series connector configuration r: straight receptacle modification code characteristic impedance d: 50 ? smb r *** d 00 terminal connection type 00: board connection type ordering information technical information part number smb003d00 (with SMT area boss) smb004d00 (without SMT area boss) sj drawing sj105033 sj107482 product specification jacs-2237-12 ? receptacle (board side)
mb-0156-3 3/3 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. smbr003d00 with SMT area boss dimensions and shapes applicable boar d pad dimensions
mb-0156-3 4/3 jae pmk div. proprietary. copyright ? 2010, japan aviation electronics industry, ltd. japan aviation electroni cs industry, limited product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2787 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change w ithout notice. please contact jae for information. notice: products shown in this leaflet are made for the applications listed below. however, if the above-mentioned prod ucts are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact jae for further information. recommended applications : computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), av devices, household applications, fa devices, etc. applicable boar d pad dimensions smbr004d00 (without SMT area boss)
|
